GE Digital Energy Series LP-11U UPS106LP2230000 6000VA 4800W Tower UPS

$ 4,474.99
$ 4,474.99
$ 6,711.00
Sold out
Quantity must be 1 or more
GE Digital Energy Series LP-11U UPS106LP2230000 6000VA 4800W Tower UPS

GE Digital Energy’s LP11 Series is a true VFI (Voltage and Frequency Independent) on line, double conversion transformer-based UPS incorporating the most advanced power electronics technology and engineered to provide the highest level of protection for all critical loads from all utility variances and failure. The LP11 is designed with an integrated transformer ensuring galvanic isolation on the output for ultimate safe installation. The UPS is easy to install and service and can be integrated into office environments as well as more hardened commercial and industrial environments.

  • Compact footprint and low noise - Easy to maneuver and install; suitable for installation even next to the user
  • Isolation transformer design - Ensuring no DC on the output; ultimate site safety
  • Matching battery cabinets - Extended runtime for all models
  • Compliance to all safety and EMI standards - UL certified
  • High reliability - >220,000 hours MTBF
  • PDU options - Options to suit several output configurations


    • Model
    LP 6 - 11 / LP 6 - 31T
    UPS: Single-phase power supply
    Output power at cos? = 0.6-0.8: 6kVA
    Output power (kVA): 4,8kW
    Accumulator batteries (V/Аh): 240/7
    Charging rate (А): 2,0
    Additional charger 8А: +
    Charging period: 1.5-3 hours till 80% of capacity
    Output power factor (cos?): 0,99
    Standard autonomy time at 50/100% load (min): 20/8
    Output isolation transformer: Standard equipment list
    Dimensions (H х W х D): 537 х 313 х 590 mm
    Noise level (dB(A)): 40-50 (EN27779) in dependence on load and temperature
    Weight (kg): 115 (LP-11) / 185 (LP-31T)
    Protection class: IP20
    Input voltage range (V): 172-285 (LP-11) / 340-460 (LP-31T)
    Input frequency range (Hz): 40-70
    Input voltage (V): 220/230/240 (selected by user)
    Output frequency (Hz): 50/60 Hz (± 0,1%)
    Cross-factor: 5:1
    Parallel operation: up to 4 devices
    Distortion of output voltage (THD) at linear load: <1%
    Distortion of output voltage (THD) at non-linear load: <10% max. at cross-factor 2,5:1
    Output voltage constancy at static load: ±1%
    Output voltage constancy at dynamic load (alternation – 0 -100-0%): < ±2% (recovery time < 10ms)
    Overload capability of inverter: 110% - 20 min. 130% - 3.5 min. 150% - 2 min.
    Environment operating temperatu: UPS: - 10 - + 40 ? C Battery: 15-25 ? C
    Humidity: 95% without condensate
    Safety standards: EN 50091-1-1; EN/IEC 60950
    EMC standard: EN 50091-2
    Standard interface: RS232, dry-type contacts
    Advances batteries control: +
    Options: RPA, SNMP-card, additional battery enclosures
    Go to full site